Rancang Bangun Smart System Pelayanan Servis Kendaraan Bermotor Berbasis Arduino Mega 2560

Authors

  • Revan Apriadi Universitas Putra Indonesia YPTK Padang, Indonesia
  • Emil Naf’an Universitas Putra Indonesia YPTK Padang, Indonesia
  • Okta Andrica Putra Universitas Putra Indonesia YPTK Padang, Indonesia

DOI:

https://doi.org/10.29240/arcitech.v3i1.7764

Keywords:

smart services, Arduino Mega2560, RFID Sensor, Keyboard, push button

Abstract

The purpose of this research is to provide convenience and development in carrying out motorcycle servicing services effectively. In identifying problems with the smart motor vehicle service service system, it was found that the system used was still manual and had not been clearly coordinated. Efforts must be made, for example, to create a technology-based smart service system. such as using Rfid, Keyboard, Buzzer, Push Button, LED, Speaker The application of a smart system for servicing motorized vehicles can be carried out properly and connected to the Arduino Mega 2560. With a smart system for servicing motorized vehicles, this will greatly help the existing service system at the service station. motorbike or repair shop. By using the Arduino Mega 2560 microcontroller, you can properly control the motor vehicle service smart system by utilizing the RFID sensor.

Downloads

Download data is not yet available.

References

Ade Mubarok(dkk),†Sistem Keamanan Rumah Menggunakan RFID, Sensor PIR dan Modul GSM Berbasis Mikrokontrolerâ€, Vol.5 No.1, April 2018

Anak Agung Gde Ekayana,†Implementasi Sistem Penguncian Pintu Menggunakan RFID Mifare Frekuensi 13.56 MHz dengan Mutli Accesâ€, Vol. 15, No. 2, Juli 2018

Benedictus Surya Artha Mahendra. 2018. Kunci Pintu Pintar Berbasis RFID dan Biometri dengan Sistem Pengamanan Kamera. Jurnal USD, November. Program Studi Teknik Elektro Fakultas Sains dan Teknologi, Universitas Sanata Dharma Yogyakarta.

Christian, C. Rancang Bangun Sistem Informasi Kehadiran Dosen Berbasis Arduino Dengan RFID. Gultom, S. P., Pangaribuan, P., & Pramudita, B. A. (2021). Sistem Kontrol Penguraian Asap Rokok Pada Ruangan Tertutup Menggunakan Metode Pid. eProceedings of Engineering, Vol.8(5).

Christian, C. Rancang Bangun Sistem Informasi Kehadiran Dosen Berbasis Arduino Dengan RFID.

Deni Adi Setiawan. 2019. Prototype Home Security System dengan Autentifikasi KTPEl. Jurnal UNY, Februari. Program Studi Teknik Elektronika, Fakultas Teknik Universitas Negeri Yogyakarta.

Giyan Eko, ,,Rancang Bangun Sistem Informasi Pelayanan Jasa Home Service Dengan Model Waterfall Pada CV. Gian Motor Autoservice ‟ Vol. 17 No.1 (Maret, 2019

Harianja, H. 2018. Perancangan Aplikasi Rawat Jalan Pada Unit Pelaksana Teknis Dinas (UPTD) Kesehatan Benai. Jurnal Teknologi Dan Open Source. Vol.1(1), 8-24.

Junaidi & Yuliyan D. P. 2018. "Project Sistem Kendali Elektronik Berbasis Arduino". Anugra Utama Raharja. 12-43. Prehanto, D. R., Kom, S., & Kom, M. 2020. Buku Ajar Konsep Sistem Informasi.SCOPINDO MEDIA PUSTAKA.

Ludviyatus Sholeha,dkk ,,Pengaruh Kualitas Pelayanan Terhadap Kepuasan Pelanggan di AHASS Sumber Jaya Maha Sakti ‟ Vol. 17 No.1 Maret, 2019

Muhammad Syahwil, S.T., M.T. 2017. “Panduan Mudah Belajar Arduino Menggunakan Simulasi Proteusâ€.

Nusa Putra. 2019. “Research & Development Penelitian dan Pengembangan Suatu Pengantarâ€:74-76.

Prehanto, D. R., Kom, S., & Kom, M. 2020. Buku Ajar Konsep Sistem Informasi.SCOPINDO MEDIA PUSTAKA.

Rahmawati, N. A., & Bachtiar, A. C. 2018. Analisis dan perancangan sistem informasi perpustakaan sekolah berdasarkan kebutuhan sistem. Berkala Ilmu Perpustakaan dan Informasi, Vol.14(1). 76-86.

Rustam Efendi, ,,Perancangan Aplikasi Sistem Servis Motor Di PT.Mitra Sendang Kemakmuran‟ Vol. 2 No.2 Agustus, 2020, hlm. 31.

Rudi Lesmana, ,,Sistem Pelayanan Jasa Servis Motor Berbasis SMS Gateway Dengan Menerapkan Metode CRM ‟ Vol. 11 No.2 Maret, 2017

Sutanti, A., MZ, M. K., Mustika, M., & Damayanti, P. 2020. Rancang Bangun Aplikasi Perpustakaan Keliling Menggunakan Pendekatan Terstruktur. Komputa: Jurnal Ilmiah Komputer dan Informatika. Vol.9(1), 1-8.

Wadisman, C. 2018. Perancangan Aplikasi Pengolahan Data Logistik pada Kantor Cabang BRI Solok. INTECOMS: Journal of Information Technology and Computer Science.Vol.1(2), 140-150. Wijaya, I. W. S., KS, I. G. H. W., Setya, I. D. M. A. P., & Permana, I. K. G. R. A. 2021. Program Menghitung Banyak Bata pada Ruangan Menggunakan Bahasa Python. TIERS Information Technology Journal. Vol.2(1).

Downloads

Published

30-06-2023

How to Cite

Apriadi, R., Naf’an, E., & Putra, O. A. (2023). Rancang Bangun Smart System Pelayanan Servis Kendaraan Bermotor Berbasis Arduino Mega 2560. Arcitech: Journal of Computer Science and Artificial Intelligence, 3(1), 32–42. https://doi.org/10.29240/arcitech.v3i1.7764

Issue

Vol. 3 No. 1 (2023): June 2023

Section

Articles

Citation Check

License

Authors who publish with Arcitech: Journal of Computer science and Artificial Intelligence agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).